IntraServer Technology ITI-90-100250 manual 40

Device	at	Description	Notes
HDD	Node0	Shared Disk Drive 1 mounted	SCSI-ID = 0
		on the removable caddy. The	Terminator = Disabled
		drive has an SCA connector	TermPwr = Off
		that permits hot swap.
SCA-Adapter	Node0	Adapter fixed at the rear of	Terminator = Auto
		the backplane on top section.
Internal Cable	Node0	SCSI-68 pin ultra-wide cabel
		8’ long that connects the
		SCA-adapter (IN) and the
		ITI-8241C-R (Channel A)
ITI-8241C-R	Node0	The rear I/O Transition card	This card is plugged at
		has a SCSI channel A internal	the rear of the ITI-
		connector and an external	8241C-S.
		micro connector.
External Cable	Node0	Micro connector SCSI
(One End)		external cable
External Cable	Node1	Micro connector SCSI
(Other end)		external cable
ITI-8241C-R	Node1	The rear I/O Transition card	This card is plugged at
		has a SCSI channel A internal	the rear of t he ITI-
		connector and an external	82141C-S.
		micro connector.
Internal Cable	Node1	SCSI-68 pin ultra-wide cable
		8’ long that connects between
		SCA-adapter (IN) and ITI-
		8241C-R (channel A)
SCA-Adapter	Node1	Adapter fixed at the rear of	Terminator = Auto
		the backplane on top section.
DHH	Node1	Shared Disk Drive 1 mounted	SCSI-ID=0
		on the removable caddy. The	Terminator = Disabled
		drive has an SCA connector	TermPwr = Off
		that permits hot swap.

Table 6: SUNCluster™ Cabling and Termination Details

Additional configurations are possible, additional diagrams may be added in a future manual revision.

Page 40 of 83