Configuring the Video for Rear I/O

To configure the ITI-8241C-S Video to exit the rear of the system cabinet via the ITI-8241C-R rear I/O module, use the following procedure:

§Locate J10 and J11. (See Figure 2 for jumper locations)

§Move each of the jumpers on J10 and J11 from the “F” position to the “R” position.

FRF

J11

J10

R

Figure 5: Video Configured for Front I/O

FRF

J11

J10

R

Figure 6: Video Configured for Rear I/O

The Video connector on the ITI-8241C-R rear I/O module will now be active, and the front Video connector on the ITI-8241C-R module will be inactive.

Page 21 of 83