IntraServer Technology ITI-90-100250 Configuring Ethernet for Rear I/O

Configuring Ethernet for Rear I/O

To configure the ITI-8241C-S Ethernet to exit the rear of the system cabinet via the ITI-8241C-R rear I/O module, use the following procedure:

§Locate J6, J7, J8 and J9. (See Figure 2 for jumper locations)

§Move the jumpers for each port to the Front “F” or Rear “R” position.

Each port can be configured for front I/O or rear I/O.

J9 = Port 3		J8 = Port 2		J7 = Port 1		J6 = Port 0
R	F	R	F	R	F	R	F

Figure 7: Ethernet Configured for Front I/O

J9 = Port 3		J8 = Port 2		J7 = Port 1			J6 = Port 0
R	F	R	F		R	F	R	F

Figure 8: Ethernet Configured for Rear I/O

Page 22 of 83