Invacare Pronto M51 Base Disconnecting/Connecting the Joysticks, SPJ+ Joysticks, MPJ+ Joysticks

SECTION 5—WHEELCHAIR OPERATION

Disconnecting/Connecting the Joysticks

NOTE: For this procedure, refer to FIGURE 5.10 on page 40.

NOTE: The joystick connector is located at the rear of the seat frame.

SPJ+ Joysticks

Disconnecting

1.Hold the light GREY collar portion of the joystick connector with one hand and the controller connector on the wheelchair in the other and disconnect them by pulling them apart.

Connecting

WARNING

The joystick connector and controller connector fit together in one way only. DO NOT force them together.

1.Hold the light GREY collar portion of the joystick connector with one hand and the controller connector on the wheelchair in the other and align them.

2.Lightly push to engage the joystick connector and the controller connector.

Light Grey Collar	Controller
	Connector
Joystick Connector

FIGURE 5.10 Disconnecting/Connecting

the Joysticks - SPJ+ Joysticks

MPJ+ Joysticks

NOTE: For this procedure, refer to FIGURE 5.11.

Disconnecting

1.Pull the latch away from the joystick connector.

2.Disconnect the joystick connector from the remaining connectors.

Connecting

1.Ensure the latch is pulled away from the joystick connector.

Joystick

Connector

Latch

2.Connect the joystick connector to the other connectors.

3.Push the latch in to secure the joystick connector to the other connectors.

Other Connectors

FIGURE 5.11 Disconnecting/Connecting

the Joysticks - MPJ+ Joysticks

Pronto® M51™ Base with SureStep® 40 Part No. 1148076