SECTION 9—BATTERIES
1.Plug the female connector of the AC power cord (supplied) to the AC receptacle on the charger and plug in the male connector on the AC power cord into the wall outlet.
2.The On/Off LED indicator is blinking RED, this is abnormal. Unplug AC power cord from the on‐board battery charger and wall outlet. Charger may need to be replaced. Contact an Invacare dealer or qualified technician.
3.When the On/Off LED indicator light is Off, charger is Off.
4.When the Charge LED indicator light is YELLOW, the batteries are charging.
5.When the Charge LED indicator light is solid GREEN, the batteries are fully charged (as their condition will allow).
6.When charging is complete, unplug the male connector of the AC power cord from the wall outlet and then unplug the female connector of the AC power cord from the AC receptacle on the charger.
WARNING
DO NOT operate wheelchair with AC power cord attached to the wheelchair.
Charger | AC Receptacle | Female Connector on | Male Connector | |
on Charger | on AC Power | |||
AC Power Cord | ||||
(Hidden from View) |
| Cord (Connects to | ||
| (Connects to AC | |||
|
| |||
|
| Wall Outlet) | ||
|
| Receptacle on Charger) | ||
|
|
|
| To Wall |
| Outlet |
ON/OFF INDICATOR | STATUS |
SOLID RED | Charger On |
“BLINKING” RED | Abnormal |
LED “OFF” | Charger Off |
CHARGING INDICATOR | STATUS |
YELLOW | Charging |
SOLID GREEN | Fully charged |
FIGURE 9.6 On-Board Battery Charger
Pronto® M51™ Base with SureStep® | 60 | Part No. 1148076 |
