SECTION 5—WHEELCHAIR OPERATION
MK6i™ SPJ+ w/PSS and MK6i SPJ+ w/ACC Joystick Switches and Indicators
NOTE: For this procedure, refer to FIGURE 5.3.
|
| Joystick | |
| Information |
| |
| Gauge Display |
| |
On/Off | Mode Button* |
| |
Button |
| ||
Decrease | Speedometer | Not | |
Speed Button |
| ||
(Tortoise) | Increase | Active | |
| Speed Button | Additional Input | |
GREEN | (Hare) | ||
for Powered | |||
| |||
LED |
| ||
| Seating Switch | ||
|
|
Service Indicator
*NOTE: The mode button is only present on SPJ+ w/ACC joystick.
DETAIL “A” -
FRONT VIEW
Charger/
Programming
Input
FIGURE 5.3 MK6i™ SPJ+ w/PSS and MK6i SPJ+ w/ACC Joystick Switches and Indicators
On/Off Button
This button is located at the front of the joystick housing. It is used to turn the wheelchair On and Off, to remove the joystick from sleep mode (if programmed) and to lock or unlock the joystick (if programmed).
Speedometer
The speedometer is used to show the maximum speed. The right‐most LED indicates current maximum speed setting. The bottom left GREEN LED flashes to indicate that the joystick is in speed limit mode. Speed limit mode limits the drive speed to a pre‐ programmed value, typically when the seat has been elevated and the wheelchair is required to drive at 20% speed.
Part No. 1148076 | 31 | Pronto® M51™ Base with SureStep® |
