SECTION 9—BATTERIES

2.Position the front battery in the front of the battery tray.

3.Position rear battery in rear of battery tray.

NOTE: Ensure that both batteries are properly seated and resting on the battery tray.

4.Connect the rear battery to the front battery (RED and BLACK connectors).

5.Connect the front battery to the controller (BLACK connector).

6.Reinstall the top shroud. Refer to Removing/Installing the Top Shroud on page 85.

7.Perform one of the following:

Lower the seat assembly to the up position. Refer to Tilting the Seat Assembly (Formula CG Only) on page 41.

Install the seat assembly from the wheelchair. Refer to Removing/Installing the Seat Assembly on page 43.

8.Lower the seat assembly to the down position. Refer to Tilting the Seat Assembly (Formula CG Only) on page 41.

9.Remove the battery shroud. Refer to Removing/Installing the Battery Shroud on page 47.

10.Connect joystick cable (not shown). Refer to Disconnecting/Connecting the Joystick on page 121.

Battery Handle

Battery Shroud

 

BLACK Battery

RED Battery Connectors

Connectors

BLACK Controller

 

Rear Battery

Connector

Joystick

Plug into Controller

 

Cable

 

 

Front Battery

Rear of

 

Wheelchair

Front of

 

 

Wheelchair

Wheelchair

 

Base Frame

 

FIGURE 9.2 Removing/Installing Batteries from/into Battery Tray

Pronto® M51Base with SureStep®

54

Part No. 1148076

Page 54
Image 54
Invacare Pronto M51 Base manual Removing/Installing Batteries from/into Battery Tray