Invacare Pronto M51 Base Wheelchair Operation, Operating the Wheelchair, Turning the Power On/Off

SECTION 5—WHEELCHAIR OPERATION

SECTION 5—WHEELCHAIR

OPERATION

WARNING

After ANY adjustments, repair or service and before use, make sure that all attaching hardware is tightened securely - otherwise injury or damage may result.

Set-up of the Electronic Control Unit is to be performed only by a qualified techni- cian. The final adjustments of the controller may affect other activities of the wheel- chair. Damage to the equipment could occur under these circumstances.

Operating the Wheelchair

Turning the Power On/Off

NOTE: For this procedure, refer to FIGURE 5.1.

NOTE: MPJ+ Joystick available on Formula CG seating system only.

1. To turn the power On, perform one of the following steps:

JOYSTICK	ACTION
MPJ+	Move the On/Off switch Forward to the On position.
SPJ+	Press the On/Off button.

2. Turning the power Off can be achieved by performing one of the following steps:

JOYSTICK	ACTION
MPJ+	Move the On/Off switch Back to the Off position.
SPJ+	Press the On/Off button.

SPJ+ Joysticks

On/Off Button

MPJ+ Joystick (CG ONLY)

On/Off

Switch

FIGURE 5.1 Turning the Power On/Off

Part No. 1148076 29 Pronto® M51™ Base with SureStep®