SECTION 8—TOP SHROUD AND WHEELS
Installing
1.Ensure the seat is tilted back to the up position or removed. Refer to Tilting the Seat Assembly (Formula CG Only) on page 41 or Refer to Removing/Installing the Seat Assembly on page 43.
2.Place the battery shroud on the base frame and push downward to engage the hook and loop straps.
3.Perform one of the following:
•Lower the seat assembly to the up position. Refer to Tilting the Seat Assembly (Formula CG Only) on page 41.
•Install the seat assembly from the wheelchair. Refer to Removing/Installing the Seat Assembly on page 43.
4.Connect the joystick. Refer to Disconnecting/Connecting the Joysticks on page 40.
5. Connect the powered seating system
NOTE: Batteries and seating system not shown for clarity.
Base
Frame
Battery
Shroud
Hook and 
Loop Straps
FIGURE 8.1 Removing/Installing the Battery Shroud
Pronto® M51™ Base with SureStep® | 48 | Part No. 1148076 |
