SECTION
Adjusting the Footrest Height
Model PW93, PW93E, and PW93ST Footrests
NOTE: For this procedure, refer to FIGURE 6.2.
1.Remove any accessory from the footrest(s).
2.Remove the footrest from the wheelchair. Refer to Installing/Removing the Footrests on page 31.
NOTE: Lay footrest on a flat surface to simplify procedure.
3.Remove the hex bolt, coved washers and locknut that secure the lower footrest to the footrest support.
4.Reposition the lower footrest to the desired height.
5.Reinstall hex bolt, coved washers and locknut that secure lower footrest to footrest support. Tighten securely.
6.Repeat STEPS 1‐5 for the other footrest, if necessary.
7.Reinstall the footrest(s) onto the wheelchair. Refer to Installing/Removing the Footrests on page 31.
8.Reinstall any accessory onto the footrest(s).
| Footrest Support |
Locknut | Coved Washer |
| Hex Bolt |
Coved Washer |
|
| Lower Footrest |
NOTE: PW93ST style footrest shown. PW93 and PW93E footrests adjust the same way.
FIGURE 6.2 Adjusting the Footrest Height - Model PW93, PW93E, and PW93ST Footrests
Part No.1106645 | 32 | Nutron® Series |
