SECTION
3.Position the back angle plate to one (1) of six (6) back angles. Refer to Detail “A” of FIGURE 8.3.
4.Reinstall the front hex screw and washer, securely tighten with locknut. Refer to FIGURE 8.3 for correct hardware orientation.
5.Securely tighten the rear hex screw that secures the back adjustment plate to the wheelchair frame.
Back |
| Detail “A” | |
Angle |
| ||
|
| ||
Plate |
|
| |
Rear Hex |
| Back | |
| Angle | ||
Screw |
| ||
Washer | Plate | ||
(Loosen, but | |||
| |||
do not | Locknut | Back Angles | |
Remove) | |||
| 85º | ||
|
| ||
|
| 90º | |
|
| 95º | |
| Wheelchair | 100º | |
| Frame |
|
Front | 110º | 105º |
| ||
Hex |
| |
|
| |
Screw |
|
|
FIGURE 8.3 Changing the Back Angle
Nutron® Series | 42 | Part No.1106645 |
