Tracer® SX5 Recliner Conversion Kit 2Part No. 1110194 Rev A
REMOVING EXISTING WHEELCHAIR COMPONENTS
To convert the wheelchair to a recliner, the following components MUST be removed:
Rear Wheels
Arms
Back Canes
Back Upholstery
Wheel Locks
Fork/Caster Assemblies - if wheelchair is 14 to 18-inches wide.

REMOVING THE REAR WHEELS

Refer to REMOVING/INSTALLING THE REAR WHEELS in the Owners Manual, part
number 1110550.
This kit contains the following items:
DESCRIPTION QUANTITY DESCRIPTION QUANTITY
Back Assembly 1 Wheel Lock Shoe Extension 2
Headrest Assembly 1 Quad Release 2
Headrest Pillow 1 Spring Button Assembly 2
Fork Assembly with Caster 2* Armrest Plug 2
Washers (Fork Stem) 2* Rear Arm Socket with Hardware 2
Pivot Bushing 2 Anti-Tipper 2
Offset Wheel Bracket (Left) 1 Cap Nut 4
Offset Wheel Bracket (Right) 1 Flat Head Socket Screw 2
U-Bracket 2 Offset U-bracket Mounting Screw 2
SX5 Owners Manual 1
*NOTE: These items are not included in kits for 20 and 22-inch wide (300 lb. weight capacity)
wheelchairs. These wheelchairs are shipped from the factory with the required fork, fork hardware,
and casters already installed. Refer to the FRONT CASTER section of the Owners Manual, part
number 1110550, for more information.