Invacare Tracer SX5 REMOVING THE WHEEL LOCKS (FIGURE 2), REMOVING THE FLIP BACK ARMS, REMOVING THE BACK CANES (FIGURE 1)

Part No. 1110194 Rev A 3Tracer® SX5 Recliner Conversion Kit
Back Cane
Wheelchair Frame
Locknut
FIGURE 1 - REMOVING THE BACK CANES
Hex Screw
OUTSIDE OF
WHEELCHAIR
INSIDE OF
WHEELCHAIR
REMOVING THE WHEEL LOCKS (FIGURE 2)
1. Ensure the wheel lock is in the open (unlocked) position.
2. Remove the bolt and locknut that secure the wheel lock assembly to the wheelchair
frame.
3. Repeat STEPS 1-2 for the opposite wheel lock.
Bolt and
Locknut
FIGURE 2 - REMOVING THE WHEEL LOCKS
Wheel Lock
Rear Upright
REMOVING THE FLIP BACK ARMS
Refer to USING OR REPLACING FLIP-BACK ARMREST in the Owners Manual, part
number 1110550.
REMOVING THE BACK CANES (FIGURE 1)
1. Remove the locknut from the bottom of each back cane.
2. Unthread the hex screw from the bottom of each back cane.
3. Remove the back canes with the upholstery from the wheelchair frame.