Press TIMER to confirm. Display shows “ON” and hour digits begin to flash.
Press SKIP/TUNING or to set the on time hour.
Press TIMER to confirm. Minute digits begin to flash.
Press SKIP/TUNING or to set the on time minute.
Press TIMER to confirm. Display shows “OFF” and hour digits begin to flash.
Press SKIP/TUNING or to set the off time hour.
Press TIMER to confirm. Minute digits begin to flash.
Press SKIP/TUNING or to set the off time minute.
Press TIMER to confirm. The display reverts to the current time and remains on the display.
To cancel the timer setting, press TIMER once more, disappears from the display.
Sleep Timer (On Remote Control Only)
This system includes a programmable Sleep Timer that allows you to fall asleep to between 10 and 90 minutes of music and then shuts the power off automatically.
To operate the sleep timer
Turn the system on and operate as usual.
Press the SLEEP button on the remote control.
The display will show “SLEEP 90” indicating that the sleep timer will shut the power off after 90 minutes.
Press the SLEEP button to decrease the amount of sleep timer operation. Each time you press the SLEEP button you subtract 10 minutes from the sleep timer. The minimum sleep timer operation is 10 minutes.
After a few seconds the Sleep Time display disappears and the normal display returns. The small SLEEP indicator remains flashing in the display.
Note:
You can shut the unit off manually before the Sleep Timer counts down to “00” by pressing the STANDBY/ button at any time.
If you are falling asleep to CD, the system will only operate until the CD ends. If you set the Sleep Timer for 90 minutes but your CD is only 45 minutes long, the music will stop after 45 minutes.
50
CONNECTING EXTERNAL DEVICES
AUXILIARY INPUT JACK
This system includes an AUX IN Jack to allow you to connect external audio equipment and listen to the sound from the external equipment through the speakers of this system.
Examples of the types of external equipment that may be connected are:
An MP3 player such as iPod shuffle.
Audio outputs from DVD or VCR.
Cassette player.
Turntable.
MD player.
To use AUX IN:
Connect the audio output jack or headphone jack of the external audio equipment to the AUX IN jack on the left panel of this system.
You may leave your external device permanently connected to this system if you wish. It is not necessary to disconnect the external device in order to listen to the Tuner or CD player in this system.
To listen to the external audio source select the “AUX” mode using the FUNCTION/ button.
External audio source
AUX IN | Cable (not included) | ||||
|
|
|
|
|
|
SUBWOOFER OUT
You may connect a powered subwoofer to this system using SUBWOOFER OUT and an
Powered Subwoofer
Cable (not included)
SUBWOOFER
OUT
51