iSymphony V1BLUE user manual Compatible Audio Formats, Loading and Removing a Disc

COMPATIBLE AUDIO FORMATS

This system supports playback of songs in CD-audio (pre-recorded CDs), MP3 and Windows Media formatted Audio (WMA). This system does not support Digital Rights Management (DRM). This system cannot play songs purchased from iTunes or other songs in AAC format, songs in ATRAC format or songs purchased from some online music retailers. It may be possible to convert your music to one of the playable compressed formats, or burn it to an audio CD, depending on the DRM restrictions.

This system is compatible with MPEG1 Audio Layer 3 (MP3) 32, 44.1 or 48kHz formats. The recording format should be in accordance with ISO9660 CD-ROM file system. MP3 file name requires MP3 or mp3 as an extension. Chinese characters cannot be displayed, although files featuring them can be played. VBR (Variable Bit Rate) files can be played, but playing time may not be shown correctly. Up to 99 folders and 999 tracks can be accessed.

LOADING AND REMOVING A DISC

1)Press the OPEN/CLOSE button on front panel to open the CD door.

2) Load a disc into the player with the printed label facing out.

3) To remove a disc, press the OPEN/CLOSE button and remove the disc from the tray only when it has fully opened.

CAUTIONS:

Do not put anything except a CD into the compartment. Foreign objects can damage the mechanism. Keep the disc compartment closed when not in use to prevent dirt and dust from entering the mechanism.

Never place more than one disc into the disc compartment at any time.

INSERTING AND REMOVING FLASH DEVICES

Flash devices are inserted into compatible openings on the right of the unit.

SD/MMC

USB DISK

Inserting and Removing USB Flash Memory Devices

USB

Insert the USB connector into the socket on the unit and press gently to seat. The connector can only be inserted one way.

Remove the device by gently pulling it out of the socket.

Inserting and Removing USB Flash Card Devices

SD MMC

Insert the card into the slot by gently pressing into position until it locks in place. Cards can only be inserted one way.

Remove the card by gently pulling it out of the slot.

! Be sure to use the proper card adapter if required. Failure to use the correct adapter may cause damage to the memory card or the unit.

Only one type of memory card can be inserted at one time.

16 17