iSymphony V1BLUE user manual Protect Your Furniture, Connect the Main Unit to Power

UNPACKING AND SET-UP

Carefully remove the unit from the carton and remove all packing material from the unit. Check to be sure that you have all the following items in addition to the main unit:

AM antenna (x1) FM antenna (x1) Remote control (x1) Batteries (x2)

Wireless iPod Dock (x1)

AC adapter for Wireless Dock (x1) iPod Dock Adapters (x4)

Power cable (x1) Wall bracket (x1)

If any item is missing, consult your dealer immediately.

We suggest that you retain the original carton and packing materials in case it ever becomes necessary to return your unit for service. This is the only sure way to protect the unit from damage in transit. If you do dispose of the carton and packing materials, please do so property. We care about our environment.

Remove any descriptive labels or stickers from the front panel of the unit. Do not remove any labels or stickers that may be affixed to the back panel of the main unit of the speakers.

Protect Your Furniture

This model is equipped with non-skid rubber feet to prevent the product from moving when you operate the controls. These feet are made from non-migrating rubber material specially formulated to avoid leaving any marks or stains on your furniture. However certain types of oil based furniture polishes, wood preservatives, or cleaning sprays may cause the rubber feet to soften, and leave marks or a rubber residue on the furniture. To prevent any damage to your furniture we strongly recommend that you purchase small self-adhesive felt pads, available at hardware stores and home improvement centers everywhere, and apply these pads to the bottom of the rubber feet before you place the product on fine wooden furniture.

BASIC SYSTEM SET-UP

Follow these 6 steps to complete basic system set-up.

1Set-Up and Connect AM Antenna, Connect and Extend FM Antenna

AM

FM 75 Antenna

FM AM

Antenna Antenna

Jack Jack

2Connect the Main Unit to Power

!This system is designed to operate on 120V 60Hz AC house current. Connecting this system to any other power supply could result in damage to the unit which is not covered by your warranty.

NOTE: The system has a polarized AC plug with one wide blade and one narrow blade. The plug will only fit into a matching polarized AC outlets. This is a safety feature to reduce the possibility of electric shock. If the plug will not fit in your AC outlets, your probably have outdated non-polarized outlets. You should have your outdated outlets changed by a qualified, licensed electrician. Do not file the wide blade on the plug, or use an adapter to make the plug fit into your outlet. This defeats the safety feature and could expose you to electric shock.

AC outlet

Wider Hole

and Blade

Polarized AC Cord Plug (One blade is wider than the other)