Viewing Current Network Settings
You can use the “:netinfo=” command to view the current network settings of the Web Xpander using WinEVM. From the MegaController screen, click ASCII and send the command “:netinfo=” (no quotes) out of the controller to COM1. The network settings should appear in the MegaController log window.
If your PC and Web Xpander are connected through a Cable/DSL router and your PC and router are already configured to use addresses in the range displayed, open a web browser and type “http://” followed by the IP Address displayed. (example: http://192.168.0.5) in the address bar and press Enter. If everything is configured properly, you should be prompted for a username and password to access the Web Xpander. The default username and password are both “webx”.
