:telnet= | Sets the port (default = 23) for | :telnet=23 |
| telnet (Ethernet to Serial) |
|
:reset= | Resets the Web Xpander | :reset= |
:factory= | Sets network values to factory | :factory= |
| presets (must be followed by |
|
| :reset=) |
|
:netinfo= | Displays network settings | :netinfo= |
The Web Xpander must be reset (either with the :reset= command or by pressing the reset button on the Web Xpander circuit board) for these changes to take effect.
Web Pages
When you access the Web Xpander with a web browser (Internet Explorer 5.0 or greater recommended) you’ll see the main menu. The main menu consists of 16 buttons grouped in to four functional areas. Clicking on each button will display a web page particular to the button selected.
LIGHTING
Single click “On”, “Off” or “Idle” to change status. Click device Name then select Set Level or Preset Level to adjust brightness.
