3.Select CONTINUE using the Quickset pad. The Quickset pads are located on either side of the control panel dsplay.

4.Set LIGHT soil level by entering 200 using the number pads for two hours of cleaning time. Press the Enter pad.

OR

Select MEDIUM for a moderately soiled oven and three hours of cleaning time.

OR

Select HEAVY for a heavily soiled oven and four hours of cleaning time.

5.CLEAN, TIME, LOCKED and the cleaning time countdown will be displayed while the oven is cleaning. OVEN COOLING will appear in the display when the cleaning time has been completed and the oven is still locked.

Important: The door lock will disengage approximately one hour after the cleaning time is completed. OVEN COOLING will go off in the display when the oven door has unlocked.

To Delay a Self-Clean Cycle:

1. Press Clean pad.

2.REMOVE RACKS will be displayed. Remove the racks.

3.Select CONTINUE using the Quickset pad.

4.Set LIGHT soil level by entering 200 using the number pads for two hours of cleaning time. Press the Enter pad.

OR

Select MEDIUM for a moderately soiled oven and three hours of cleaning time.

OR

Select HEAVY for a heavily soiled oven and four hours of cleaning time.

5.The door will lock. CLEAN, TIME, LOCKED and the cleaning time countdown will be displayed

6.After door locks, press the More Options pad.

7.Select DELAY using the Quickset pad.

8.Select the number of hours you want to delay the start of the self-clean cycle.

9.The delay time and cleaning time will be displayed.

After Self-Cleaning

About one hour after the end of the clean cycle, the lock will disengage and OVEN COOLING will go off in the display. At this point, the door can be opened.

Some soil may leave a light gray, powdery ash which can be removed with a damp cloth. If soil remains, it indicates that the clean cycle was not long enough. The soil will be removed during the next clean cycle.

If the oven racks were left in the oven and do not slide smoothly after a clean cycle, wipe racks and embossed rack supports with a small amount of vegetable oil to restore ease of movement.

A white discoloration may appear after cleaning if acidic or sugary foods were not wiped up before the clean cycle. This is normal and will NOT affect performance.

Notes:

If the oven door is left open, CLOSE DOOR will appear in the display until the door is closed.

If more than 30 seconds elapse between pressing the Clean pad and pressing a number pad, the program will automatically return to the previous display.

The oven door will be damaged if it is forced to open during cleaning or cooling process.

The first few times the oven is cleaned, some smoke and odor may be detected. This is normal and will lessen or disappear with use. If the oven is heavily soiled, or if the broiler pan was accidently left in the oven, excessive smoke and odor may occur.

As the oven heats and cools, you may hear sounds of metal parts expanding and contracting. This is normal and will not damage your appliance.

6

Page 7
Image 7
Jenn-Air 8113P753-60 important safety instructions After Self-Cleaning, To Delay a Self-Clean Cycle