OVEN COOKING
Control Panel
A B C D EFG H
I J K L M N O P
The control panel is designed for ease in programming. The display window shows options for each function and moves from step to step through the programming process. Control panel features vary by model. Oven display above is programmed for a bake operation.
A | Rapid Preheat | Use to decrease preheating time. |
B | Convect | Use for convection baking and roasting. |
C | Bake | Use for baking and roasting. |
D | Broil | Use for broiling and top browning. |
E | TIMER 1 | Sets timer. |
F | Display | Displays oven functions, options and |
|
| window time of day. |
G | TIMER 2 | Sets timer. |
H | Number Pads | Use to enter time and temperature, |
|
| or to enter Favorites names. |
I | Favorites | Use to access, program or save |
|
| baking cycles. |
J | More Options | Use to access additional features. |
K | Clean | Use to set |
L | Setup | Use to view or change factory |
|
| default settings. |
M | Warm Drawer | Use to control the Warming Drawer. |
N | Oven Light | Use to turn the oven light on or off. |
O | CANCEL | Cancels all operations except Timer, |
|
| Clock, Favorites, Setup and Warm |
|
| Drawer (select models). |
P | Quickset pads | Use to select options in display |
|
| window (next to display window |
|
| on both sides). |
|
|
|
Quickset Pads
Quickset pads are located on each side of the display window and are used to select the desired function or option in the display window. To select the option or function, press the Quickset pad next to the word.
If you need to back out of a function or option in the display, press the Back pad. When your programming is complete, press the Enter pad or wait four seconds and the function will start automatically.
Up arrows indicate additional screens with additional options. Press the Quickset pads next to the arrows to scroll through the display.
Important: Four seconds after entering the function, option, number or letter, the function will automatically be entered. If more than 30 seconds elapse between steps in programming, the function will be canceled and the display will return to the previous display.
Clock
Setting the Clock:
1. Press the Setup pad.
2.Select CLOCK using the Quickset pads.
3.Select TIME.
4.Enter the time using the number pads.
5.Press Enter pad.
6.Select AM or PM in 12 hour mode. (For 24 hour clock, see page 15.)
7.To exit the Setup mode, press Setup pad.
Cont.
14
