3.Apply masking tape to the end of a 7 mm nut driver to help hold the gas orifice spud in the nut driver while changing it. Insert nut driver into the gas opening and press down onto the gas orifice spud and remove by turning the gas orifice spud counterclockwise and lifting out. Set gas orifice spud aside.
AB C
A.Oven back
B.Broil burner orifice
C.Broil burner orifice hole
4.Gas orifice studs are stamped with a letter and a number. Install the Number 148 oven broil burner orifice spud.
5.Place LP gas orifice in plastic parts bag for future use and keep with package containing literature.
6.Replace the broil burner in the hole in the oven back, with the broil burner electrode inside the broil burner electrode hole, as illustrated.
3.Slide the bake burner cover to the right or left.
A
A. Bake burner cover
4.Lift up and remove oven bake burner cover and set aside.
5.Remove the oven bake burner screws and oven bake burner and gently set aside.
A
D 
A
C 
B
A. Oven bake burner
B. Oven bake burner screws
C. Oven bake burner electrode bracket
D. Oven bake burner electrode
6. Lift up clip on the oven bake burner electrode bracket with a finger or
B
A
AB C
A. Broil burner orifice hole
B. Broil burner electrode
C. Broil burner electrode hole
7.Reinstall the oven broil burner screw. See Step 1 for illustration.
To Convert Oven Bake Burner (Left Oven Cavity on 48" [121.9 cm] models)
1.Remove oven racks.
2.Remove the oven door. See the “Oven Door” section in the Use and Care Guide.
A. Oven bake burner electrode bracket
B. Electrode bracket clip
25
