GAS CONVERSIONS
IMPORTANT: Gas conversions from Natural gas to LP gas must be done by a qualified installer.
WARNING
Explosion Hazard
Use a new CSA International approved gas supply line.
Install a
Securely tighten all gas connections.
If connected to LP, have a qualified person make sure gas pressure does not exceed 14" (36 cm) water column.
Examples of a qualified person include:
licensed heating personnel,
authorized gas company personnel, and authorized service personnel.
Failure to do so can result in death, explosion, or fire.
LP Gas Conversion
WARNING
Tip Over Hazard
A child or adult can tip the range and be killed.
Connect
Reconnect the
Failure to follow these instructions can result in death or serious burns to children and adults.
1.Turn the manual shutoff valve to the closed position.
B
A
C
A. To range
B. Shutoff valve (closed position)
C. Gas supply line
To Convert Gas Pressure Regulator
1.Remove screws from kick plate.
B
A
A. Kick plate
B. Remove these screws.
2.Push up on kick plate to release plate from shoulder screws.
3.Gently lay kick plate aside to avoid scratching the stainless steel.
4.Locate the gas pressure regulator at the left rear of the range.
A
A. Gas pressure regulator
5.Remove the gas pressure regulator cap by using a large flat- blade screwdriver, turning the regulator cap counterclockwise.
NOTE: Do not remove the spring beneath the cap.
2.Unplug range or disconnect power.
13
