Electrical Requirements

WARNING

Electrical Shock Hazard

Plug into a grounded 3 prong outlet.

Do not remove ground prong.

Do not use an adapter.

Do not use an extension cord.

Failure to follow these instructions can result in death, fire, or electrical shock.

IMPORTANT: The range must be electrically grounded in accordance with local codes and ordinances, or in the absence of local codes, with the National Electrical Code, ANSI/NFPA 70 or Canadian Electrical Code, CSA C22.1.

If codes permit and a separate ground wire is used, it is recommended that a qualified electrical installer determine that the ground path is adequate.

A copy of the above code standards can be obtained from:

National Fire Protection Association

One Batterymarch Park

Quincy, MA 02269

CSA International

8501 East Pleasant Valley Road

Cleveland, OH 44131-5575

■A 120 volt, 60 Hz., AC only, 15-amp fused, electrical circuit is required. A time-delay fuse or circuit breaker is also recommended. It is recommended that a separate circuit serving only this range be provided.

■Electronic ignition systems operate within wide voltage limits, but proper grounding and polarity are necessary. Check that the outlet provides 120-volt power and is correctly grounded.

■The wiring diagram is located behind the kick plate in a clear plastic bag.

Gas Supply Requirements

WARNING

Explosion Hazard

Use a new CSA International approved gas supply line.

Install a shut-off valve.

Securely tighten all gas connections.

If connected to LP, have a qualified person make sure gas pressure does not exceed 14" (36 cm) water column.

Examples of a qualified person include:

licensed heating personnel,

authorized gas company personnel, and authorized service personnel.

Failure to do so can result in death, explosion, or fire.

Observe all governing codes and ordinances.

IMPORTANT: This installation must conform with all local codes and ordinances. In the absence of local codes, installation must conform with American National Standard, National Fuel Gas Code ANSI Z223.1/NFPA 54 - latest edition or CAN/CGA B149 - latest edition.

IMPORTANT: Range must be connected to a regulated gas supply.

IMPORTANT: Leak testing of the range must be conducted according to the manufacturer’s instructions.

Type of Gas

Natural Gas:

This range is design-certified by CSA International for use with Natural gas or, after proper conversion, for use with LP gas.

■This range is factory set for use with Natural gas. The model/ serial rating plate located under the console on the right-hand side has information on the types of gas that can be used. If the types of gas listed do not include the type of gas available, check with the local gas supplier.

LP Gas conversion:

Conversion must be done by a qualified service technician.

No attempt shall be made to convert the range from the gas specified on the model/serial rating plate for use with a different gas without consulting the serving gas supplier. To convert to LP gas, use the LP gas conversion kit provided with your range and see the “Gas Conversions” section. The parts for this kit are in the literature package supplied with the range.

6

Page 5 Page 7
Page 6
Image 6
Jenn-Air W10394575A Electrical Requirements, Gas Supply Requirements, Type of Gas, Natural Gas, LP Gas conversion
Page 5 Page 7

W10394575A specifications

The Jenn-Air W10394575A is a premium kitchen appliance that embodies the fusion of design, functionality, and cutting-edge technology, elevating the cooking experience for culinary enthusiasts and home chefs alike. This product is designed to offer superior performance while enhancing the aesthetic appeal of modern kitchen spaces.

One of the standout features of the Jenn-Air W10394575A is its high-efficiency performance, which is driven by innovative technology that ensures consistent heating and cooking results. The appliance is equipped with powerful heating elements that provide quick responsiveness, reducing overall cooking time. With its precise temperature control, users can expect impeccable results in every dish, from delicate pastries to hearty casseroles.

A key characteristic of the Jenn-Air W10394575A is its elegant design, tailored to fit seamlessly into contemporary kitchen interiors. The sleek lines and high-quality materials used in its construction not only create a visually stunning appliance but also ensure durability and long-term reliability. The surface is designed for easy cleaning, allowing users to maintain its pristine appearance with minimal effort.

In addition to its aesthetic appeal, the Jenn-Air W10394575A also incorporates user-friendly features that enhance the cooking experience. Its intuitive interface includes a digital display and straightforward controls, making it easy for users to select their desired settings. The appliance offers multiple cooking modes, catering to various culinary techniques such as baking, broiling, and warming, which provides versatility for different cooking styles.

Safety is another priority in the design of the Jenn-Air W10394575A. The appliance comes equipped with advanced safety features, including automatic shut-off and cool-touch surfaces, ensuring a secure cooking environment. This attention to safety allows users—regardless of expertise—to cook with confidence.

Overall, the Jenn-Air W10394575A is a remarkable addition to any kitchen, combining stylish design, advanced technology, and practical features. It is ideal for anyone who appreciates quality and performance, transforming everyday cooking into a refined culinary experience. Whether you're preparing a casual family meal or hosting a dinner party, this appliance is designed to meet and exceed the needs of modern homeowners.
Top Page Image Contents