WARNING
Tip Over Hazard
A child or adult can tip the range and be killed.
Connect
Reconnect the
Failure to follow these instructions can result in death or serious burns to children and adults.
INSTALLATION REQUIREMENTS
Tools and Parts
Gather the required tools and parts before starting installation. Read and follow the instructions provided with any tools listed here.
■ | Burner bases and burner caps |
■ | Griddle drip tray (on griddle models) |
Tools needed
■Tape measure
■#2 Phillips screwdriver
■¹⁄₈" x 4¼"
■Level
■Drill
■Wrench or pliers
■Pipe wrench
■Adjustable wrench or ⁵⁄₈" wrench
■³⁄₈" drive ratchet
■¹⁄₈" drill bit
■¹⁵⁄₁₆" combination wrench
■¹⁄₄", ³⁄₈", ⁵⁄₁₆" nut drivers
■³⁄₁₆" carbide tip masonry bit
■Marker or pencil
■
■Noncorrosive
■Tubing cutter
For LP/Natural Gas
Conversions
■Adjustable wrench
■½"
■7 mm nut driver
■Masking tape
■ | LP orifice package (W10393336) |
■ | Conversion label |
NOTE: The cooktop is manufactured for use with Natural gas. To convert to LP gas, see the “Gas Conversions” section.
Parts needed
All models must be installed with a backguard if installing at zero clearance to a combustible backwall. See “Cabinet Dimensions” in the “Location Requirements” section for installation requirements.
■ 30" (76.2 cm) Adjustable Backguard |
Order Part Number 8285148 |
■ 36" (91.4 cm) Adjustable Backguard |
Order Part Number 8284756 |
■ 48" (121.9 cm) Adjustable Backguard |
Order Part Number 8284755 |
■ 22" (55.9 cm) Backsplash with |
30"(76.2 cm) Ranges |
Order Part Number W10285447 |
■ 22" (55.9 cm) Backsplash with |
36" (91.4 cm) Ranges |
Parts supplied
Check that all parts are included.
■
A
B
A.
B.
NOTE:
■Gas pressure regulator
■Burner grates
Order Part Number W10285448 | |
■ 22" | (55.9 cm) Backsplash with |
48" | (121.9 cm) Ranges |
Order Part Number W10285449 |
To order, see the “Assistance or Service” section of the Use and Care Guide.
Check local codes and consult gas supplier. Check existing gas supply and electrical supply. See “Electrical Requirements” and “Gas Supply Requirements” sections.
It is recommended that all electrical connections be made by a licensed, qualified electrical installer.
High Altitude Conversion
To convert the range for elevations above 6,560 ft (1999.5 m), order a High Altitude Conversion Kit.
■Part Number W10394294 - LP high altitude
■Part Number W10394293 - Natural gas high altitude
To order, see the “Assistance or Service” section of the Use and Care Guide.
3