3.Drill two ¹⁄₈" (3.0 mm) holes that correspond to the bracket holes of the determined mounting method. See the following.
Floor Mounting
B
A
A. #12 x 1⁵⁄₈" screws
B.
Wall Mounting
B
A
A. #12 x 1⁵⁄₈" screws
B.
4.Using a Phillips screwdriver, mount
Depending on the thickness of your flooring, longer screws may be necessary to anchor the bracket to the subfloor. Longer screws are available from your local hardware store.
5.Move range close enough to opening to allow for electrical connections to be made. Remove shipping base, cardboard or hardboard from under range.
6.Continue installing your range using the following installation instructions.
Make Gas Connection
WARNING
Explosion Hazard
Use a new CSA International approved gas supply line.
Install a
Securely tighten all gas connections.
If connected to LP, have a qualified person make sure gas pressure does not exceed 14" (36 cm) water column.
Examples of a qualified person include:
licensed heating personnel,
authorized gas company personnel, and authorized service personnel.
Failure to do so can result in death, explosion, or fire.
1.Assemble flexible connector from gas supply pipe to pressure regulator located in the middle rear of the range.
2.Apply
3.Attach one adapter to the gas pressure regulator and the other adapter to the gas shutoff valve. Tighten both adapters.
4.Use a ¹⁵⁄₁₆" combination wrench and channel lock pliers to attach the flexible connector to the adapters. Check that connector is not kinked.
A B C
D
E
| H G | F |
A. Gas pressure regulator | E. Manual gas shutoff valve | |
B. Use | F. ½" or ¾" gas pipe |
|
C. Adapter (must have ½" male | G. Use | |
pipe thread) | H. Adapter |
|
D. Flexible connector |
|
|
9