7.Lift up clip on the oven bake burner electrode bracket with a finger or
B
A
A. Oven bake burner electrode bracket
B. Electrode bracket clip
8.Pull electrode out of bracket.
A
B
A. Grasp electrode here.
B. Bracket
9.Apply masking tape to the end of a 7 mm nut driver to help hold the gas orifice spud in the nut driver while changing it. Insert nut driver into the gas opening and press down onto the gas orifice spud and remove by turning the gas orifice spud counterclockwise and lifting out. Set gas orifice spud aside.
A
A. Gas orifice spud
10.Gas orifice studs are stamped with a letter and a number. Install the Number 189 oven bake burner orifice spud.
11.Place LP gas orifice in plastic parts bag for future use and keep with package containing literature.
12.Push down on the clip on the electrode bracket.
B
A
A. Oven bake burner electrode bracket
B. Electrode bracket clip
23