Jenn-Air LIB0057678, W10526413C User Servicing Instructions, Replacing the Fuse

USER SERVICING INSTRUCTIONS

WARNING

Electrical Shock Hazard

Disconnect power before servicing.

Replace all parts and panels before operating.

Failure to do so can result in death or electrical shock.

NOTE: If the hood does not operate, check to see if the circuit breaker has been tripped and that there is power to the unit.

Replacing the Fuse

1.Disconnect power

2.Using a flat-blade screwdriver, pry the fuse cover away from the front panel of the downdraft hood.

3.Remove the fuse from the fuse holder by pushing it from the bottom side with the screwdriver.

A B

A. Fuse holder

B. Remote up/down switch connector

4.To avoid the risk of fire, replace the fuse with a 125 volt, 5 amp non-time delay fuse.

5.Push cover in until it locks into position.

6.Reconnect power.

17