More Information on the Self-Cleaning Process
•A slight odor may be detected, and if an oven is heavily soiled, some smoke may be visible. Some smoke and odor during the cleaning process is a normal occurrence. Since the oven ventis locatedonthe top of the control panel, vapors,
moisture, etc. may be seen coming from this area.
•During the cleaning process, do not be alarmed if an occasional flame is visible
through the oven window. This is caused by excessive food soil that was not removed before the oven was set to clean.
•SINCE THE DOORAND WINDOW OF THE OVEN WILL GET WARM DURING THE
•Some types of soil may disintegrate but leavealight filmor heavier deposit of ash. The amount of ash depends on the amount of soil which was in the oven. After oven has cooled, this ash may be removed with a damp sponge. If other dark
deposits remain after wiping with asponge, the time set for the length of cleaning was not enough. Increase the cleaning time for future cleanings or clean more frequently. The normal c_eeningtime is 2 1/2 hours. A maximum of 4 hours may be selected if necessary.
\\
•if racks have been left inoven during the cleaning process,they should be treated as follows. After the cleaning process is completed andthe oven has cooled, buff the underside of rack edges with
•To remove occasional spillovers between cleanings, use a
•It is better to clean the oven regularly rather than wait until there is a heavy build- up of soil in the oven.
•During the cleaning process, the kitchen should be well ventilated to help eliminate normal odors associated with cleaning.
•
•DO NOT USE COMMERCIAL OVEN CLEANERS IN OR AROUND THE SELF- CLEANING OVEN AREA.
•DO NOT USE ALUMINUM FOIL OR OTHER LINERS IN THE OVEN.
27
