3)Electrical features
¾Output signal:
The available differential mode voltage is more than 450mV，and peak voltage is less than 13V. The common mode AC peak voltage is less than 2.5V.
¾Input signal:
The differential mode voltage that more than 160mV is identified as available signal
4)Interface shall use RJ45 outlet which accord with
5)Interface signal definition
Pin | Signal name | Instruction |
1 | TX+ | Data transmission+ |
|
|
|
2 | TX- | Data transmission- |
|
|
|
3 | RX+ | Data receiving+ |
|
|
|
4 | NC | Reserve |
|
|
|
5 | NC | Reserve |
|
|
|
6 | RX- | Data receiving- |
|
|
|
7 | NC | Reserve |
|
|
|
8 | NC | Reserve |
|
|
|
6.5 WLAN Interface Board
1)Interface features
¾Supports 802.11b, 802.11g protocol
¾Supports 9100 port printing,LRP printing
¾Supports status back
¾Supports parameter configuration
¾Supports Firmware update
¾Supports HTTP protocol
2)Protocols supported
¾IP
¾ARP
¾ICMP
¾TCP
¾UDP
¾DHCP
¾TFTP
¾HTTP
For detailed specification, please refer to User Manual Of WLAN Interface Module.
- 32 -
