44 DB 0 ; MSB BYTE
45 DB 0 ;NUMBER OF INSERTION IN SLOT 2 LSB BYTE
46 DB 0 ; MSB BYTE
47 DB 0 ;NUMBER OF INSERTION IN SLOT 3 LSB BYTE
48 DB 0 ; MSB BYTE
49 DB 0 ;NUMBER OF INSERTION IN SLOT 4 LSB BYTE
50 DB 0 ; MSB BYTE
51 DB 0 ;NUMBER OF INSERTION IN SLOT 5 LSB BYTE
52 DB 0 ; MSB BYTE
53 DB 0 ;NUMBER OF INSERTION IN SLOT 6 LSB BYTE
54 DB 0 ; MSB BYTE
55 DB 0 ;NUMBER OF INSERTION IN SLOT 7 LSB BYTE
56 DB 0 ; MSB BYTE
57 DB 0 ;NUMBER OF INSERTION IN SLOT 8 LSB BYTE
58 DB 0 ; MSB BYTE
59 DB 0 ;NUMBER OF INSERTION IN SLOT 9 LSB BYTE
60 DB 0 ; MSB BYTE
61 DB 0 ;NUMBER OF INSERTION IN SLOT 10 LSB BYTE
62 DB 0 ; MSB BYTE
63 DB 0 ;NUMBER OF INSERTION IN SLOT 11 LSB BYTE
64 DB 0 ; MSB BYTE
65 DB 0 ;NUMBER OF INSERTION IN SLOT 12 LSB BYTE
66 DB 0 ; MSB BYTE
67 DB 0 ;NUMBER OF INSERTION IN SLOT 13 LSB BYTE
68 DB 0 ; MSB BYTE
69 DB 0 ;NUMBER OF INSERTION IN SLOT 14 LSB BYTE
70 DB 0 ; MSB BYTE
71 DB 0 ;NUMBER OF INSERTION IN SLOT 15 LSB BYTE
72 DB 0 ; MSB BYTE

Important Settings

Line 6: Contains the default SAF-TE SCSI ID for the enclosure.
Line 11 - 36: Contains default canister SCSI ID settings for the enclosure
(Lines 11 - 20 are for Slots 0-9, the remaining 21 - 36 lines are not typically used)
Line 37 - 40: Contains the amount of power on time
Line 41 - 72: Contains the number of insertions per slot
SAF-TE Commands
This section covers the SAF-TE commands that are implemented in the enclosure. The SAF-
TE Processor in the enclosure is referred to as the SEP. It is possible that some of the
commands may also be accessed through a host controller menu if the host controller has
implemented the same commands. The commands that are not marked with a '*' are
mandatory SAF-TE commands and must be implemented by the host adapter for basic
communication to the enclosure.
Not all of the commands listed here are required to be implemented in order to be SAF-TE
compliant. The commands that are optional and are not required in order to meet the SAF-TE
specification but are specified within the specification have been marked with a '*' before the
FORTRAH1 Chaparral G5312 InstallationGuide Rev C 9-13