• When the desired time has been set, the
function continues to flash for approx. 5
seconds. After that the function is then lit.
The set time begins to run.
• With Countdown the oven must also be
switched on in order to set the clock
function.
•By pressing and at the same time, the
time set can be reset.
Checking the time set or remaining
Press the Selection button repeatedly,
until the appropriate clock function
flashes and the time set or remaining is
displayed.
Using residual heat with the
Cook time and End time
clock functions
When the Cook time and End
time clock functions are used, the
oven switches the heating elements
off, when 90% of the time set or
calculated has elapsed. The residual
heat present is used to continue the
cooking process until the time set has
elapsed (3 to 20 mins.).
Countdown
1. Press the " TIME FUNCTIONS " button
repeatedly until Countdown flashes.
2. Set the desired Countdown using the
or button.
After about 5 seconds the display shows
the time remaining. Countdown lights
up. When 90% of the time set has elapsed,
an audible signal sounds.
When the time has elapsed, an audible
signal sounds for 1 minute. “00.00” and
Countdown flash.
To stop the flashing and the audible signal:
Press any button.
Cook time
1. Select the oven function and temperature.
2. Press the " TIME FUNCTIONS " button
repeatedly until Cook time flashes.
3. Set the desired cooking time using the
or button (max. 09.59 hours).
Cook time lights up.
When the time has elapsed, “00.00” and
Cook time flash.
An audible signal sounds for 2 minutes.
The oven switches itself off.
To stop the flashing and the audible signal:
Press any button.
End time
1. Select the oven function and temperature.
2. Press the " TIME FUNCTIONS " button
repeatedly until End time flashes.
3. Using the or button set the desired
switch-off time.
End time lights up and the cook time
calculated is displayed.
When the time has elapsed, “00.00” and
End time flash.
An audible signal sounds for 2 minutes.
The oven switches itself off.
To stop the flashing and the audible signal:
Press any button.
13