John Lewis JLBIOS610 instruction manual

Models: JLBIOS610

1 40
Download 40 pages 16.91 Kb
Page 27
Image 27
Manual background

5.Hold the upper edge of the door glass and take it out of the guide by pulling it upwards.

6.Tip the water collecting channel towards the door glass and lift upwards to remove from the guide.

Cleaning the door glass and the water collecting channel

Clean the door glass panels and the water collecting channel thoroughly with a solution of water and washing-up liquid. Then dry them carefully.

Inserting door glass panels and the water collecting channel

1.Insert the snap-in hook of the water collecting channel sideways into the guide. Apply some pressure from above to snap in hook on the other side.

2.From above, insert the door glass at an angle into the door profile at the bottom edge of the door and lower it.

3.Take hold of the door trim (B) at each side, position it on the inside edge of the door and push the door trim (B) onto the upper edge of the door.

27

Page 27
Image 27
John Lewis JLBIOS610 instruction manual