Something not working
If the oven is not working correctly, please carry out the following checks, before contacting your local Service Force Centre.
Important! If you call out an engineer to a fault listed below, or to repair a fault caused by incorrect use or installation, a charge will be made even if the appliance is under guarantee.
Problem
The oven is not heating up
The oven lighting is not operating
F11 appears in the clock display
A fault code that is not listed above appears in the clock display
Possible cause
The oven has not been switched on
The clock has not been set
The required settings have not been set
The oven’s automatic
The house wiring fuse (in the fuse box) has tripped
The oven light bulb is faulty
The meat probe has short circuited or the plug of the meat probe is not firmly in position in the socket
Electronic fault
Possible solutions
Switch oven on
Set the current time on the clock
Check the settings
See Automatic
Check fuse. If the fuses trip several times, please call a qualified electrician
Replace oven light bulb
Insert the meat probe plug into the socket on the oven side wall as far as it will go.
Switch the appliance off and on again via the house fuse or the safety switch in the fuse box. If it is displayed again, please contact the Customer Care Department
If you are unable to remedy the problem by following the above suggestions, please contact your dealer or our extended warranty administrators on 0870 010 7887 who will give you the details of your local repair agent.
Warning! Repairs to the appliance are only to be carried out by qualified service engineers. Considerable danger to the user may result from improper repairs.
29
