Jotul Woodstove F 400 manual Safety Notices, Installation, Table of Contents, USA/Canada

Table of Contents
Standards and Safety Notices
Standards / Codes	2
Safety Notices	3
Installation	3
Assembly Before Installation
Unpack the Stove	4
Flue Collar Reversal	4
Chimney Connector	4
Chimney Requirements	4
Masonry Chimneys	4
Prefabricated Chimneys	5
Chimney Height	5
Wall Pass-Throughs	5
Connecting to the Chimney
Masonry Chimney	6
Hearthmount / Fireplaces	6
Prefabricated Chimneys	6
Clearances to Combustibles
Floor Protection	6
Clearances to Walls and Ceilings	6
Using Shields to Reduce Clearances	7
Alcove Installation	7
Mobile Home Installation	7
Clearance Diagrams	8
Clearance Chart	9
Operation
Wood Fuel	10
Controls	10
Break-in Procedure	10
Starting / Maintaining the Fire	10
Adding Fuel	11
Formation of Creosote	11
Maintenance
Ash Removal	11
Glass Care	11
Cleaning	11
Glass Removal	12
General Maintenance
Gaskets	12
Gasket replacement	12
Gasket List	12
Chimney System	12
Accessories
Firescreen	12
Stove-top Thermometer	13
Outside Air Kit	13
Floor Bracket Kit	13
Rear Heat Shield	13
Bottom Heat Shield	13
Illustrations
Figures	14 - 17
Parts Diagram and List	18
Appendix A
Alternate Floor Protection	18

USA/Canada

Safety Notices

•Burn solid wood fuel only.

•Do not use chemicals or fluids to start the fire. Do not burn garbage or flammable fluids.

•If this room heater is not properly installed, a house fire may result. To reduce the risk of fire, follow the installation instructions. Failure to follow these instructions may result in property damage, bodily injury, or loss of life.

•Contact the local building or fire officials about restrictions and installation inspection requirements in your area.

•Do not connect this stove to any air distribution duct or system.

•Extremely hot while in operation! Keep children, clothing and furniture away. Contact will cause skin burns.

•Avoid creating a low pressure condition in the room where the stove is operating. Be aware that operation of an exhaust fan or clothes dryer can create a low pressure area and consequently promote flow reversal through the stove and chimney system. In some cases, the optional Outside Air Kit #154335 can be used to alleviate this condition. The chimney and building, however, always work together as a system - provision ofoutside air, directly or indirectly to an atmospherically vented appliance will not guarantee proper chimney performance. Consult your local Jøtul authorized dealer regarding specific installation/performance issues.

•Jøtul recommends that this stove be installed by a professional solid fuel technician or that you consult one if you do the work yourself. Also, consult your insurance company regarding any other specific requirements.

Installation

If this solid fuel room heater is not properly installed, a house fire may result. For your safety,follow the installation directions. Contact the local building or fire officials about restrictions and installation inspection requirements in your area.

Your local officials have final authority in determining if a proposed installation is acceptable. Any requirement by the local authority having jurisdiction that is not specifically addressed in this manual, defaults to NFPA 211, and local codes in the U.S. or in Canada, CAN/CSA-B365-M and local codes.

3