Tunnel Services PIC

Software release	■ JUNOS 8.0R2 and later (Type 1, Type 2, and Type 3)
	NOTE: This PIC is not supported in JUNOS Release 8.1R1.

Description	■ Power requirement: 0.07 A @ 48 V (3.4 W)
Hardware features	■ Loopback function that encapsulates and de-encapsulates packets
	■ OC12/STM4 tunneling bandwidth on FPC1; OC48/STM16 tunneling bandwidth on FPC2;
	OC192/STM64 tunneling bandwidth on FPC3
Software features	For a list of the software features available for services PICs, see the JUNOS Services Interfaces
	Configuration Guide.
	■ IP-IP unicast tunneling
	■ GRE unicast tunneling
	■ PIM sparse mode unicast tunneling
LEDs	One tricolor:
	■ Off—Not enabled
	■ Green—Online with no alarms or failures
	■ Amber—Online with alarms for remote failures
	■ Red—Active with a local alarm; router has detected a failure

114■ Tunnel Services PIC

Juniper Networks M120 manual Tunnel Services PIC