Juniper Networks M120 manual SONET/SDH OC3c/STM1 PIC

SONET/SDH OC3c/STM1 PIC

SONET/SDH OC3c/STM1 PIC

Software release	■ JUNOS 8.0R2 and later (Type 1)
	NOTE: Although the illustration shows a multimode PIC, a multimode PIC and a single-mode
	intermediate reach PIC are both supported.
	NOTE: This PIC is not supported in JUNOS Release 8.1R1.

Description	■	Four OC3 ports
	■ Power requirement: 0.49 A @ 48 V (23.7 W)
Hardware features	■	Multiplexing and demultiplexing
	■ Rate policing on input
	■ Rate shaping on output
	■ Packet buffering, Layer 2 parsing
Software features	■	SONET/SDH framing
	■	Link aggregation
	■ Alarm and event counting and detection
	■ Dual-router automatic protection switching (APS)
	■ Multiprotocol Label Switching (MPLS) fast reroute
	■	Encapsulations:
		■ High-Level Data Link Control (HDLC)

■ Frame Relay

■ Circuit cross-connect (CCC)

■ Translational cross-connect (TCC) ■ Point-to-Point Protocol (PPP)

SONET/SDH OC3c/STM1 PIC ■ 83