Juniper Networks M120 Adaptive Services II PIC, Software release, Description, Hardware features

M120 Internet Router PIC Guide

Adaptive Services II PIC

Software release	■ JUNOS 8.0R2 and later (Type 1)
	NOTE: This PIC is not supported in JUNOS Release 8.1R1.

Description	■ Supports tunnel services. This feature is included with the PIC and does not require an
	individual license.
	■ Individual licenses must be purchased for additional services.
	■ Power requirement: 0.4 A @ 48 V (19 W)
Hardware features	■ Support for up to 2000 service sets
	■ Active monitoring on up to 1 million flows
	■ Support for MTUs up to 9192 bytes for Gigabit Ethernet and SONET interfaces
Software features	Depending on your JUNOS release and individual licenses, software features for this PIC can
	include the features listed in Table 7 on page 13. For more information about the software
	features available for services PICs, see the JUNOS Services Interfaces Configuration Guide.
LEDs	Status LED, one tricolor:
	■ Off—PIC is offline and it is safe to remove it from the chassis.
	■ Green—PIC is operating normally.
	■ Amber—PIC is initializing.
	■ Red—PIC has an error or failure and no further harm can be done by removing it from
	the chassis.

Application LED, one bicolor:

■Off—Service is not running.

■Green—Service is running under acceptable load.

■Amber—Service is overloaded.

12■ Adaptive Services II PIC