Juniper Networks M120 manual Gigabit Ethernet PIC with Xenpak

10-Gigabit Ethernet PIC with XENPAK

10-Gigabit Ethernet PIC with XENPAK

Software release	■	10-Gigabit Ethernet PIC with XENPAK: JUNOS 8.0R2 and later (Type 3)
	■	XENPAK-OTN transceivers: JUNOS 9.0R2 and later

NOTE: This PIC is not supported in JUNOS Release 8.1R1.

Description	■	One 10-Gigabit Ethernet port
	■ Power requirement: 0.55 A @ 48 V (26.6 W)
	■ Supports large Ethernet frame sizes for more efficient throughput across the intra-POP
		network
	■ Optical interface support—See Table 19 on page 74 and Table 20 on page 75
Hardware features	■	High-performance throughput at speeds up to 10 Gbps
	■ Full-duplex mode
	■ Maximum transmission units (MTUs) up to 9192 bytes
	■ 64 source MAC address filters
	■ 960 destination MAC filters
Software features	■	Virtual Router Redundancy Protocol (VRRP) support
	■ 802.1q virtual LANs (VLANs) support
	■ 802.3ae link aggregation support
	■	RMON EtherStats
	■ Optical diagnostics and related alarms :
		■	Transceiver temperature
		■	Laser bias current
		■	Laser output power
		■	Receive optical power

10-Gigabit Ethernet PIC with XENPAK ■ 73