Juniper Networks M120 manual Adaptive Services II FIPS PIC

Adaptive Services II FIPS PIC

Adaptive Services II FIPS PIC

Software release	■ JUNOS 8.0R2 and later (Type 1)
	NOTE: This PIC is not supported in JUNOS Release 8.1R1.

Description	■ JUNOS-FIPS requires an Adaptive Services II FIPS PIC for external IPSec connections. See
	the Secure Configuration Guide for Common Criteria and JUNOS-FIPS for more information.
	■ Supports tunnel services. This feature is included with the PIC and does not require an
	individual license.
	■ Individual licenses must be purchased for additional services such as Network Address
	Translation (NAT), stateful firewall, intrusion detection services (IDS), IPSec. J-Flow
	accounting, and voice services. For information about which services are supported by
	PIC and platform type, see the JUNOS Services Interfaces Configuration Guide.
	■ Power requirement: 0.4 A @ 48 V (19 W)
Hardware features	■ Support for up to 2000 service sets
	■ Active monitoring on up to 1 million flows
	■ Support for MTUs up to 9192 bytes for Gigabit Ethernet and SONET interfaces

Adaptive Services II FIPS PIC ■ 15