Juniper Networks M120 manual Optical Interface Support for SONET/SDH OC192/STM64 cFPC

FPCs and cFPCs Supported

Table 4: Optical Interface Support for 10-Gigabit Ethernet cFPC (continued)

Parameter	10-GBASE-S	10-GBASE-L	10-GBASE-E	10-GBASE-Z
Maximum distance	50/125 MMF cable,	9/125 SMF cable:	9/125 SMF cable:	9/125 SMF cable:
	2000 Mhz-Km:	6.2 miles/10 km	24.8 miles/40 km:	49.6 miles/80 km
	984 feet/300 m		Distances greater than
			30 km are considered
	50/125 MMF cable,		to be engineered
	500 Mhz-Km:		links.
	269 feet/82 m
	50/125 MMF cable,
	400 Mhz-Km:
	217 feet/66 m
	62.5/125 MMF cable,
	200 Mhz-Km:
	108 feet/33 m
	62.5/125 MMF cable,
	160 Mhz-Km:
	85 feet/26 m
Transmitter wavelength	840 through 860 nm	1260 through	1530 through	1530 through
		1355 nm	1565 nm	1565 nm
Average launch power	–4.5 through –1 dBm	–4 through 0.5 dBm	–4.7 through 4 dBm	0 through 4 dBm
Average receive power	–9.9 through	–14.4 through	–15.8 through	–24.0 through
	–1.0 dBm	0.5 dBm	–1.0 dBm	–7.0 dBm
Receiver saturation	–1.0 dBm	0.5 dBm	–1.0 dBm	–7 dBm
Receiver sensitivity	–9.9 dBm	–14.4 dBm	–15.8 dBm	–24 dBm

The SONET/SDH OC192/STM64 cFPC supports the XFPs listed in Table 5 on page 7.

Table 5: Optical Interface Support for SONET/SDH OC192/STM64 cFPC

		Intermediate reach
Parameter	Short reach (SR) 1	(IR) 2	Long Reach (LR) 2
Transceiver model number	XFP-10G-L-OC192-SR1	XFP-10G-E-OC192-IR2	XFP-10G-Z-OC192-LR2.
Optical interface	Single-mode	Single-mode	Single-mode
Transceiver type	XFP	XFP	XFP
Standard	Telcordia GR-253	Telcordia GR-253	Telcordia GR-253
	OC192 SR1	OC192 IR2	OC192 LR2

FPCs and cFPCs Supported ■ 7