Latte macchiato, cappuccino
Warm milk and milk foam
2 Preparation
Your IMPRESSA can prepare a latte macchiato or cappuccino at the touch of a button. There is no need to move the glass or cup.
Example: Proceed as follows to prepare one latte macchiato.
Precondition: ‘Please select product:’ is displayed. Milk is connected to the cappuccino frother.
T Place a glass under the cappuccino frother.
TTurn the setting wheel of the cappuccino frother to the Milk Foam position ü.
TPress the ‘Latte macchiato’ button.
‘Latte macchiato’, the milk foam is prepared.
Preparation stops automatically when the preset amount of milk is reached.
EThere is a short interval while the hot milk separates from the milk foam. This allows the typical layers of a latte macchiato to form. You can choose the length of this interval in program- ming mode (see Chapter 4 ‘Permanent settings in program- ming mode – Product settings’).
Coffee preparation starts. The preset amount of water flows into the glass. Preparation stops automatically. ‘Please select product:’ appears on the display.
To make sure the cappuccino frother always works properly, you must rinse and clean it regularly (see Chapter 5 ‘Maintenance – Rin- sing the cappuccino frother’).
Example: Proceed as follows to prepare milk foam.
Precondition: ‘Please select product:’ is displayed. Milk is connected to the cappuccino frother.
T Place a cup under the cappuccino frother.
TTurn the setting wheel of the cappuccino frother to the Milk Foam position ü.
EIf you want to heat the milk turn the setting wheel of the cap- puccino frother to the Milk position z.
17
