4 Permanent settings in programming mode
TPress the ‘Save’ button.
‘Saved’ appears briefly on the display. ‘Product settings (2/6)’
OT Press the P button to exit programming mode. ‘Please select product:’
Enabling and disabling In the programme item ‘Product settings (2/6)’ / ‘product selector’
product selector view you can make the following setting:
U‘Active’
U Product selector view is active and can be started by turning the Rotary Switch g when the IMPRESSA is ready for use.
U‘Inactive’
U Product selector view is inactive.
Example: Proceed as follows to disable product selector view.
Precondition: ‘Please select product:’ is displayed.
OT Press the P button.
‘Maintenance status (1/6)’
gT Turn the Rotary Switch until the programme item ‘Product settings (2/6)’ is displayed.
TPress the ‘product selector’ button. ‘product selector’
TPress the ‘Inactive’ button. TPress the ‘Save’ button.
‘Saved’ appears briefly on the display. ‘Product settings (2/6)’
OT Press the P button to exit programming mode. ‘Please select product:’
Product selector view can now no longer by started by tur- ning the Rotary Switch.
27
