4Permanent settings in programming mode
|
| TPress the ‘Volume’ button. |
|
| TPress the ‘ < ’ or ‘ > ’ button to change setting for the fill |
|
| volume to ‘40 ml’. |
|
| TPress the ‘Save’ button. |
|
| ‘Saved’ appears briefly on the display. |
|
| TPress the ‘Next’ button. |
|
| TPress the ‘Interval’ button. |
|
| TPress the ‘ < ’ or ‘ > ’ button to change setting for the interval |
|
| to ‘40 sec.’. |
|
| TPress the ‘Save’ button. |
|
| ‘Saved’ appears briefly on the display. |
|
| ‘Latte macchiato’ |
| O | T Press the P button to exit programming mode. |
|
| ‘Please select product:’ |
Enable or disable | In the programme item ‘Product settings (2/6)’ / | |
settings | you can make the following setting: | |
| U | ‘Active’ |
|
| U |
| U | strength or amount of water). |
| ‘Inactive’ |
U
Example: Proceed as follows to disable
Precondition: ‘Please select product:’ is displayed.
OT Press the P button.
‘Maintenance status (1/6)’
gT Turn the Rotary Switch until the programme item ‘Product
settings (2/6)’ is displayed.
TPress the
TPress the ‘Inactive’ button.
26