For Motorola and EDACS system; to change your display between the Scan List indicators and trunk bank display, press RVRS.
ID SCAN 867.9875 NFM
Bank 1234567890 BANK:10 MOTTYP2
ID SCAN 867.9875 NFM
List 1234567890
For LTR systems only, the talkgroup must be active in order to change the Scan List and bank indicators. If the talkgroup is not active, change the Scan List by using the Menu screen.
Setting the Delay Mode for Trunking ModeThe delay time is automatically set for each talkgroup for ID Scan mode and ID Search mode. The setting periods can be changed. To set the delay feature, enter into the Menu mode.
1.Press MENU.
2.Select 2:SCAN OPTION / 2:TRUNK by rotating the VFO and pressing E.
3.Select the bank number by rotating the VFO and pressing E.
4.Select 4:DELAY and then press E.5.Select a delay time (see page 32) and then press E.Note: If you want to verify the Delay mode setting, press and hold MENU for 2 seconds in Trunking mode.
Setting Priority in Trunking ModeYou can set priority in your trunking lists, just as you do in your conventional ones. You can set the priority by pressing and holding PRI for 2 seconds in ID Scan Hold mode.
After you’ve set up your Scan List, press PRI to activate it.It’s very similar to conventional priority although there is no "interrupt" during the transmissions. Priorities are checked in between transmissions.
With Priority ON, you can hold on an ID in your Scan List, such as Scan List 6, memory position 7, and the scanner will check all the priorities in all the active Scan Lists in between any transmissions on the ID on which you’re holding. The lowest numbered priority will be checked first. For example, the Priority ID in List 1 will be checked before the Priority in List 2, etc.
Note: This function does not work in LTR tracking.To select a Scan List location and store an ID during Search mode, follow these steps:
1.When your scanner stops on an ID you want to store, press▲/HOLD.MID:4128 867.8375 NFM
ID tag
Bank:04 MOT TYP2
54