| | I-CALLs | TALKGROUPS | |
| | | | |
1 | ON | YES | Received normally | Use this choice to receive I-Calls |
| | | | together with normal |
| | | | talkgroup traffic. |
| | | | |
2 | OFF | Not received | Received normally | This is the BC785D default |
3 | ONLY | YES | NOT RECEIVED | Use this setting to listen to I-Calls, |
| | | | and block all talkgroup reception. |
| | | | For quick access to this mode, |
| | | | press . (decimal) then RSM. |
| | | | |
You can hold any I-Call IDs. Because you can only hold on one ID, and there are two IDs involved in any I-Call communication (the transmitting and the receiving units), you might not hear the full conversation, but you probably will.
☞In Search mode, when you hear an interesting I-Call, you can enter the instant
shortcut | . | (decimal key) then RSM to enter I-Call Only mode. This blocks all |
| |
talkgroup traffic and lets you hear just the I-Call. To return to normal reception, you must use the Menu system to select the ON or OFF option.
Note: When storing I-Call IDs, remember that the ID will be for only one of the units – either the transmitting or receiving unit. Unless you specifically want to receive a certain ID, it might be better to use the special code in the HINT below.
I-CALLS IN SCAN AND HOLD MODE
You can store I-Call IDs in Scan Lists, just like talkgroup IDs, for use by ID Scan and Scan Hold modes. To program a specific I-Call Unit ID into a Scan Lists:
EDACS or Motorola Type 1
Press | . | (decimal key) followed by the Unit ID digits, then E. |
| |
Motorola Type 2
Press 7 followed by the Unit ID digits, then E.
HINT - There is a special code to let you receive all I-Call IDs with a single Scan Lists entry. Press . (decimal key), 0, E. This will store the special code i0 in an EDACS Scan Lists, or 700000 in a Motorola Scan Lists or Digital. Then, whenever you Scan this entry, or select it in Hold mode, the scanner will receive any active I-Calls, regardless of the Unit IDs.
Note: Motorola I-CALL tracking performance may vary between systems.
Multi-Track
The BC785D allows you to track more than one system at a time. Here are some highlights of this feature:
❖You can actually track up to 10 trunking systems at one time.
❖You can trunk, scan, or search and scan conventional frequencies at the same time.
