C 001 512.0000 NFM CTCSS 250.3 Bank 1
Tone SQ ON,
CTCSS 250.3 Hz setting
C 003
512.0000 NFM
CTCSS 250.3
UNIDEN Group A
Tone Search,
CTCSS 250.3 Hz detect- ing
C 001
512.0000 NFM
DCS 025
Bank 1
Tone SQ ON,
DCS 025 setting
C 003
512.0000 NFM
DCS 025
UNIDEN Group A
Tone Search,
DCS 023 detecting
C 001 512.0000 NFM
Bank 1
Tone SQ ON,
CTCSS & DCS
C 003 512.0000 NFM
UNIDEN Group A
Tone Search,
no signal received
Additional Menu Options for Searching
Each of these additional menu options applys to all search ranges entered. If there is a range that you do not want an option to apply, then simply enter the range number on the numerical keypad. You will see the range number that you have selected disappears from the display. (For more information on these options refer to the "Menu Descriptions" section and "Additional Features" section.)
Options:
RECORD (for more information see page 16).
1.Press MENU.
2.Select 1:SERVICE OPTION / :CHAIN SEARCH / 6:RECORD by rotating the VFO and pressing E.
3.Select 1:ON by rotating the VFO and pressing E.
ATTENUATOR (for more information see page 31).
1.Press MENU.
2.Select 1:SERVICE OPTION / :CHAIN SEARCH / 4:ATTENUATOR by rotating the VFO and pressing E.
3.Select 1:ON by rotating the VFO and pressing E.
☞Remember! You can also use ▲ or ▼ instead of rotating the VFO. Also instead of pressing E, you can press the VFO control.
DELAY
Refer to page 31.
41
