Problem

 

Suggestion

APCO P25 CARD

1.

Check to see if the P-25 card is properly installed.

NOT INSTALLED

 

 

appear when the scanner

 

 

is turned on.

 

 

 

 

 

Neither APCO P25

1.

Check to see if the APCO CARD Mode is ENABLE

CARD INSTALLED

 

or DISABLE in the Menu mode (See page 68-69).

nor APCO P25 CARD

 

 

NOT INSTALLED

 

 

appear when the scanner

 

 

is turned on.

 

 

 

 

 

Scratchy or robotic sound

1.

Move to a location where the signal strength is

is heard during

 

strong.

communications.

 

 

Digital communication is not heard.

1.Verify the accuracy of the frequencies of the P-25 system you are trying to monitor.

2.You might be in a dead-spot for the P-25 system you are trying to monitor. Check other locations in the area.

DATA sound is heard at

1.

APCO project 25 systems can send data before

the beginning of digital

 

voice communication.

communications.

2.

Data sound can be heard when signal strength is

 

 

weak.

 

 

 

Robotic sound is heard.

1.

Check to see if the ENC message appears on the

 

 

display.

 

 

The scanner doesn’t monitor encrypted voice

 

 

communications.

 

 

 

CARD ERROR appears

1.

Re-install the P-25 Card.

every 10 seconds while

 

 

you are using P-25 card.

 

 

If you still cannot get satisfactory results while using your scanner or if you want additional information, please call or write the Uniden Parts and Service Division. The address and phone number is listed in the warranty at the end of this manual. If you would like immediate assistance, please call Customer Service at (800)297-1023.

If you have internet access, you can visit scanner.uniden.com for additional information.

80