Note: • You can also ▲ or ▼ when selecting a channel. Press and hold ▲ or ▼ for 1second to move up/down more quickly.
•To clear a mistake while entering the frequency, press . (decimal key) repeatedly until the display is cleared.
•If you enter a channel or frequency which is out of the scanner’s range, a beep will sound and ERROR appears on the display.
•For each channel, you can also change the step size or the mode. (See page 93).
☞Remember! You can also use ▲ or ▼ instead of rotating the VFO.
Also instead of pressing E, you can press the VFO control.
Deleting a Stored Frequency
To delete a stored frequency: a. Select a channel.
b. Press 0.
c. Then press E.
Note: Channels with no frequencies are automatically locked out.
C 010
512.0000 NFM
ERROR
OUT OF CHANNEL
C 010
512.0000 NFM
OUT OF BAND
C1000
0000.0000
Editing a Stored Frequency
1.Press MENU.
2.Select 2:SCAN OPTION / 1:CONVENTIONAL by rotating the VFO and pressing E.
3.Select the channel number you want to edit by rotating the VFO and pressing E.
4.Select 1:FREQUENCY by rotating the VFO and pressing E.
5. Edit the frequency by using | . | (decimal key) and the keypad and pressing E. |
|
|
☞Remember! You can also use ▲ or ▼ instead of rotating the VFO. Also instead of pressing E, you can press the VFO control.
Duplicate Frequency Alert
If you enter a frequency which has been stored in another channel, you will hear a beep and the channel stored displays WARNING.
Press | . | (decimal key) to clear and start again. |
|
|
Press E again to store the frequency in both channels.
C 010
512.0000 NFM
WARNING DUPLICATE 017
27
