To enter a Type 2 Talk Group ID:

1.Enter the ID you want to store.

2.Press E.

To enter a Type 1 ID:

For a Type I ID, the block number, Fleet number and Subfleet number make up the Talk Group ID number. Please see page 87.

1.

Enter the ID you want to store (ID = Block number + Fleet

 

number +

 

.

(decimal key) + Subfleet number).

2.

Press E.

 

 

 

To enter an EDACS® ID:

1.

Enter the ID you want to store.

 

Use the

.

 

(decimal key) for the "dash".

2.

Press E.

 

 

 

M5-0

4128

1216¡

ENTER ID

M5-0

------

050-2¡

ENTER ID

E5-0

------

09-022¡

ENTER ID

Hint: Remember that Uniden's AFS format allows you to enter full or partial EDACS IDs for powerful flexibility in all modes. Be sure to read the section "EDACS Reception" on page 58 to learn how this works.

Note: The BC785D default to "AFS" talkgroup displays for EDACS® only.

To enter a LTR ID:L5-0

For a LTR ID, the Area Code, Home Repeater number and ID

------

make up the Talk Group ID. Please see page 62 for more

0-02-120¡

information.

ENTER ID

1.

Enter the Area Code and then press

.

(decimal key)

 

2.

Enter the Home Repeater number and then press

.

(decimal key).

3.Enter the ID you want to store

4.Press E.

Note: To clear a stored ID while entering an ID, press 0 and E successively, and start over.

☞Remember! You can also use ▲ or ▼ instead of rotating the VFO. Also instead of pressing E, you can press the VFO control.

Assigning a Text Tag to a Talk Group ID

1.Press MENU.

2.Select 2:SCAN OPTION / 2:TRUNK by rotating the VFO and pressing E.

3.Select the bank number by rotating the VFO and pressing E. You can also enter the Bank number by using the keypad.

49