Important information
UTo completely and safely disconnect the machine from the power supply, first switch off the IMPRESSA using the On/Off
button and then at the power switch. Only then should you remove the mains plug from the power socket.
There is a risk of scalds or burns on the spouts and the cappuccino frother.
UPlace the machine out of the reach of children.
UDo not touch any hot parts. Use the handles provided.
UEnsure that the cappuccino frother is correctly fitted and clean. If incorrectly fitted or if they become blocked, the cap-
puccino frother or its parts might come off.
A defective machine is not safe and could cause injury or fire. To avoid damage and any associated risk of injury or fire:
UNever allow the mains cable to loosely hang down. The mains cable could pose a tripping hazard or become damaged.
UProtect the IMPRESSA from environmental influences such as rain, frost and direct sunlight.
UDo not immerse the IMPRESSA, mains cable or connections in water.
UDo not put the IMPRESSA or any individual parts in the dish- washer.
USwitch your IMPRESSA off at the power switch before any cleaning operation. Always wipe the IMPRESSA with a damp
cloth rather than a wet one, and protect it from prolonged exposure to water splash.
UThe IMPRESSA is not suitable for installation on a surface where a jet of water can be used.
UThe machine must not be cleaned with a jet of water.
UOnly connect the machine to the mains voltage in accordance with the information on the rating plate. The rating plate is
located on the underside of your IMPRESSA. Further technical data is provided in these instructions for use (see Chapter 9 ‘Technical data’).
UPlease only use original JURA maintenance products. Use of products that are not explicitly recommended by JURA could
damage the IMPRESSA.
7
